Nothing Corners Like a Suzuki
Motocross is a relentless game, and the technology and training needed for bike and rider to excel are too. Suzuki poured more than 40 years of open-class racebike engineering into the latest generation RM-Z450 to make it the hardest-hitting, sharpest-handling, best-balanced and most rider-friendly production motocrosser in company history. 2019 RM-Z450, the choice of Australian champion Chad Reed #22.
In motocross, you’ve got to get instantly hooked up – both out of the gate and off the corners – and also blisteringly fast down the straights. To give riders an even stronger winning balance, the redesigned RM-Z450 engine has more low-end torque, a flatter overall torque curve, faster and yet more controllable throttle response, and more peak power. Inside the airbox, the air-filter aperture is now 30-percent larger for enhanced airflow, and an MXGP-style mudguard helps keep mud and dirt out, contributing to greater engine durability. The outlet tube leading from the airbox to the fuel-injection throttle body is also straighter, reducing intake resistance for increased power across the rev range.
The fuel-injector spray path aims fuel upward to hit the throttle butterfly valve directly for improved atomisation. Inside the intake port, the updated shape improves tumble flow of the charge as it enters the cylinder, boosting power at all engine speeds. The intake-port shape is matched to a high-lift intake-cam profile, which further improves intake efficiency and engine output. Inside the combustion chamber, the piston-rib design adds strength and durability to match the engine’s higher output.
Get a Good Start
Watch any raceday motocross interview, and you’ll invariably hear “get a good start” cited as a must-do proposition. And getting holeshots is exactly what the latest version of the Suzuki Holeshot Assist Control (S-HAC) is all about. An integral part of the electronics package on the latest generation RM-Z motocross range, the updated 3-stage S-HAC system assesses throttle position and gear selection, and then adjusts ignition timing to optimise engine output for fast launches. many models have them, ours works.
The latest version of S-HAC included on the new RM-Z450 gives riders a choice of three settings which can be quickly selected via a handlebar-mounted switch. The “A” mode is programmed for hard surfaces, such as a concrete starting pad, clay or hard-packed dirt where controlling wheelspin is crucial to good starts. For 2018, the “A” mode algorithms are updated to provide even finer control as the throttle is being opened, giving the rider an even better feel for traction in the crucial initial moments of a launch. The “B” mode is for normal dirt conditions. Riders can also select the “Off” setting to retain standard ignition timing.
The current generation RM-Z450’s electronic systems work seamlessly with the rider to get the power to the ground. To maximise traction for conditions, the engine control module (ECM) automatically adjusts ignition timing and fuel injection based on throttle position, engine speed and gear position. The first RM-Z450 traction management system debuted for 2008, and a revised second-generation system arrived for 2013. The MY18/19 RM-Z450 features Suzuki's third-generation traction management system, the revised ECU features 1.6-times faster data processing and 2.5-times more memory capacity than the first-generation system.
Next generation chassis
Lighter, more rigid and more agile, the latest generation RM-Z450 aluminium chassis gives riders sharper handling, better feel and more control than ever. Its all-new lightweight frame, swingarm significantly improve turning performance, whether you’re railing a berm or diving into the inside line. The head pipe point is relocated 10mm back, resulting in a shorter, 1,480mm wheelbase while the weight distribution forward for agility and stability. Frame advancements include a more rectangular cross-section for the main spars, improved fore-aft rigidity and optimised overall rigidity, together with a 700g weight reduction. All of which directly increase cornering, shock-absorbing ability and handling stability. Swingarm upgrades include thinner materials for a 100g weight reduction and optimised rigidity, which translates to increase cornering and stability.
49mm Showa Spring Fork
All-new Showa front and rear suspension delivers improved responsiveness and terrain following, enhanced ability to absorb forces, better chassis stability, feedback and terrain feel, and improved comfort. Up front, an updated 49mm Showa coil-spring fork based on works A-type design replaces the SFF-Air fork of the previous-generation RM-Z450. Performance has been increased significantly and offers more consistent feeling throughout a moto. Machine set-up and daily maintenance is also easier for a wide range of riders. The upper triple-clamp is also lighter with optimised dimensions.
Showa Balance Free Rear Cushion (BFRC)
The first production motocross bike to feature the BFRC shock as standard equipment. This latest shock design shares technology with Suzuki's flagship GSX-R1000R sportsbike. The design balances pressure above and below the piston to better control the stroke and smooth out reactions to bumps and chop, even under severe braking.
The latest generation of RM-Z motocrossers sport a fresh new look that enhances Suzuki’s already distinctive design theme. The evolution starts with aggressive “Beak DNA” which projects a dynamic arrow form extending from the front fender through the radiator shrouds. Finished in Suzuki yellow with new team graphics and logos, the most potent RM-Z450 yet is recognisable at a glance. The styling refresh also extends to the seat shape, which makes moving between seated and standing positions easier, as well as shifting weight front or rear. And for racers, easier is always faster!
Lightweight DID Rims and Battlecross X30 Tyres
Lighter DID wheel rims and the latest Bridgestone Battlecross X30 tyres maximise grip for improved agility and control in a wide range of track conditions. Finished in durable black for a factory look, the new rims have an optimised cross section, which maintains strength while also reducing critical rotating mass by 70g total. A large diameter 270mm wave disc up-front provides phenomenal stopping performance.
Renthal Aluminium Fatbar
Fitted as standard equipment , the top-shelf Renthal aluminium Fatbar offers more strength and less vibration than standard size aluminium handlebars.
Rich & Lean Fuel Couplers
Riders can adjust the engine performance to suit varied track conditions. By plugging in either of two additional fuel-setting couplers, riders can opt for a richer-than-stock or leaner-than-stock fuel setting to make the most of any riding conditions. Included with the bike, these couplers can be easily plugged in trackside.
MA & Suzuki Exclusive Member Benefits
Suzuki and Motorcycling Australia have teamed up to offer MA Members & Officials a series of exclusive offers. As a token of appreciation for purchasing a new Suzuki Motorcycle, Suzuki Australia will cover the cost of your annual MA license fee. Find Out More
Suzuki Support Rider (SSR)
Racing is at the core of Suzuki. It is the thread that sews together Suzuki's heritage, the driving force that pushes product innovation, and the reason why countless riders have chosen to compete aboard Suzuki equipment. We're excited to announce the continuation of its Suzuki Support Rider (SSR) Contingency program for 2019. SSR gives racers a real chance at being rewarded for their commitment and results by offering contingency for National competitions including MX Nationals and Australian Supercross championships in MX1, MX2 and MXD categories, in road racing the Australian Superbike Championships (ASBK) in Superbike and Supersport classes. The SSR contingency is also available to Motorcycling Australia recognised state motocross and road racing, premier class championships. Click Here to find out more.