On November 5, 2019 at the International Motorcycle and Accessories Exhibition (EICMA), Suzuki Motor Corporation unveiled the all-new 2020 V-STROM 1050 range.
Since its inception in 2002, the V-STROM brand has attracted massive global fan-fare by providing owners with consummate comfort, convenience, reliability and enjoyment for money.
For MY20 Suzuki will introduce a new generation flagship V-STROM model line-up; the V-STROM 1050 and V-STROM 1050XT, expanding adventure horizons further than ever before.
Powered by Suzukis highly acclaimed 1037cc, 90 V-twin, DOHC engine which has further evolved for MY20, boasting increased top-end power whilst also conforming to Euro 5 emissions standards. Thanks to new camshaft profiles and timing, peak horsepower has increased considerably from 74kW / 8,000rpm to 79kW / 8,500rpm (106hp). The highly refined engine begins with a deep rumble low in the rpm range, then progresses through the mid-range along a strong and linear torque curve then keeps building through the high rpm range in a smooth yet enjoyable manner.
The distinctive new styling incorporates elements of both Suzukis legendary DR-Z desert racer and the large off-road model DR-BIG. The distinguishing beak design first adopted by Suzuki stays true to Suzukis heritage while also modernising the design to be more aggressive and bolder for the new generation V- TROM.
The most technologically advanced production Suzuki motorcycle in company history, the latest generation V-STROM is the first to boast Suzukis new Intelligent Ride System (S.I.R.S). Combining an array of electronic aids and controls as well as several unique features only available on XT, further enhancing rider useability and convenience like never before.
An advanced cruise control system works in conjunction with the new ride-by-wire throttle system to maintain the set vehicle speed without the rider needing to operate the throttle, a welcomed feature for long-distance touring that assists in reducing rider fatigue. Cruising speed can be set from approximately 50km/h to 160km/h at fourth gear or above. A switch on the right handlebar can be pressed to put cruise control into standby, and the selector switch (up/down) on the left handlebars allows the rider to adjust the speed up and down accordingly.
Suzukis famous Drive Mode Selector (SDMS) is now available on a V-STROM for the very first time, offering riders the choice of three difference output characteristic modes. A-mode provides the sharpest throttle response, B-mode provides a slightly softer throttle response and C-mode provides the softest response of the three modes.
Another Suzuki first is the Hill Hold, Slope Dependent and Load Dependent control systems available on XT. Hill hold control automatically applies the rear brake when the motorcycle is stopped on an upward slope to prevent rollback when the brakes and clutch are released. Slope Dependent control constantly monitors posture and if required controls brake pressure to prevent rear wheel lift during downhill braking.
Load Dependent system supports optimal braking by compensating for varying load conditions such as the difference between riding solo or with a pillion and loaded luggage vs unloaded.
An updated traction control system now features three modes of control (previously two) inspiring greater confidence in diverse riding conditions. Mode 1 is for spirited riding with minimal level of intervention. Mode 2 is ideal for commuting and regular riding conditions and Mode 3 is best suited for poorer riding conditions such as wet or cold roads as it offers the highest level of intervention.
An upgraded Bosch inertial measurement unit (IMU) equipped on the XT model now works on 6-directions along 3-axis rather than the 5-axis of the previous system. This allows it to detect pitch, roll, and yaw movements based on the angular rate and acceleration. This new high-performance 6-direction IMU combines a 3-axis angular rate sensor (gyrometer) and a 3-axis acceleration sensor in a single compact unit.
The motion track brake system exclusive to XT combines information on the posture of the vehicle from the new IMU with the front and rear wheel speeds. This allows the ABS to activate not only in a straight line but also when the vehicle is leaning. When the brake lever or pedal is operated, this system instantly assesses the need of ABS operation by calculating the posture of the vehicle and front and rear wheel speeds. When judging the need of operation, ABS unit decreases braking pressure, and continues to control the increase/decrease of the pressure according to the traction available.
This latest ABS system allows the rider to select from 2-levels of intervention. Mode 1 provides minimal intervention and is suitable for flat dirt roads, whilst Mode 2s intervention timing is earlier than Mode 1 and is ideal for normal tarmac roads.
A newly added Combined Brake System automatically applies pressure to the rear brake to help stablise the motorcycle when the front brake pressure rises to a certain degree.
An updated windscreen design compliments the new exterior design. Developed utilising wind-tunnel testing, the new screen can be finely adjusted without tools to one of 11 positions across a 50mm vertical range.
The instrument panel presents all required information on a full LCD screen using a clean and intuitive layout with information displayed in order of priority. Included in the display are the speedometer, tachometer (full pixel digital display), gear position indicator, odometer, trip meter (A, B), instantaneous fuel consumption, average fuel consumption, driving range, fuel level indicator, engine coolant temperature indicator, ambient air temperature indicator, clock, voltage meter, service reminder, SDMS mode, traction control mode, cruise control indicator, ABS mode, hill hold indicator, engine rpm indicator light, frost indicator light, turn signal indicator light, high beam indicator light, traction control indicator light, ABS indicator light, and neutral indicator light.
A USB port is located left side of the instrument panel. It can be used as a power source for charging a smartphone, navigation system, or other similar device.
The lightweight and compact chassis is the core factor in achieving the V-STROMs comfortable and enjoyable character. The narrow width of its V-twin engine allows the motorcycle to maintain a slim body shape even with a 20L fuel tank present, allowing the rider to easily reach the ground with their feet.
Utilising a cast aluminium twin-spar frame featuring the optimal rigidity balance for exceptional stability and handling performance. The frame supports everything a rider requires to embark on their next big adventure from straight line stability to smooth and natural cornering with high levels of traction.
The 43mm KYB inverted front fork features adjustable compression damping, rebound damping and spring preload and can be tailored based on rider preference and usage.
The V-STROM 1050XT also sports a completely new seat design that allows the seat height to be adjusted an additional 20mm higher than the standard position. The KYB rear shock features adjustable spring preload via an external hand dial to easily facilitate adjustments between riding solo, with pillion or fully loaded with luggage.
TOKICO Monobloc radial mounted front brake calipers handle stopping duties matched with dual 310mm floating discs provide strong braking performance with remarkable feel.
The footrests are constructed of tough steel and have been redesigned to make it easier for the rider to stand on flat dirt, and are also wider than the previous version.
Protection and convenience on the XT is taken to the next level with an aluminium under cowling and accessory bar guarding underneath and side of the engine whilst stronger hand guards have been employed to protect riders hands from wind, rain and flying stones. The lightweight centre stand is well balanced and is useful when performing maintenance tasks and loading luggage.
Wire-spoked aluminium rims are fitted as standard on the XT model offering improved road absorption whilst the standard model is equipped with 10-spoke cast aluminium wheels. Both variants are shod with Bridgestone Battlax Adventure A41 tyres.
A vertically stacked LED headlight and LED rear combination light deliver excellent visibility and stylish looks, the XT also features LED indicators as standard equipment.
Other niceties include Suzukis Low RPM assist system which monitors and automatically raises the idle speed when taking off from a stop or when riding slowly through traffic and Suzukis Easy Start System which provides ultra-convenient one-touch engine starting.
The MY20 V-STROM 1050/XT are expected to arrive in Australia during the middle of 2020 with final specifications, colours and pricing being confirmed closer to launch.